 |
| M3 Semiconductor Analyzer Version 2 |
 |
| The M3 Electronix, Inc. Semiconductor Analyzer Version 2 is fully assembled and calibrated. It comes complete with battery and Pomona Test Clips. The M3 Electronix, Inc. Semiconductor Analyzer Version 2 is small enough to fit in to a shirt pocket and has all of the same features as the kit version. |
Automatic Component Identification of:
Gain measurement for bipolar transistors Test current display Automatic recognition of type for bipolar transistors (Ge or Si) VBE/IB measurement Collector leakage current measurement Detection of Collector/Emitter diode and Base/Emitter shunt resistor Gate threshold voltage for MOSFETs Gate threshold, IDSS, and RDSON for JFETs Low Power Triac and Thyristor identification Unijunction transistor identification with pinout and RBB/N measurement Diode leakage current measurement Diode and Transistor junction leakage current measurement Internal short detection and resistance measurement With OP-1 test module, test standard opto-couplers and display Current Transfer Ratio, LED current and forward voltage |
| The M3 Semiconductor Analyzer is designed for out-of-circuit component testing. Operation of the analyzer is very straight forward. For transistors, simply connect the three clips - in any order - to the leads of the device under test. For diodes and LEDs, connect the two outside clips to the leads of the device under test. Pin configuration and test results will be displayed on the LCD. For a complete description of the parameters displayed for various devices, download a copy of the M3 Semiconductor User's Manual and see for yourself what a powerful addition this analyzer is to any electronics workbench. All in a small handheld device. |
Click here to download the M3 Semiconductor Analyzer User's Manual Adobe Acrobat Reader Required to view Manual |